Operation Manual

HX SERIES V0212 3
– English – Deutsch
Safety and
maintenance instructions
Working wood with machines is a pleasant job that will give you a lot of satisfaction. Nevertheless,
working with a machine requires constant attention and care. Therefore, for your own safety, pay
attention to the instructions summarised in this chapter.
– The machine can only be used safely if the operator strictly follows the operating and safety
instructions.
– It is absolutely necessary to read this manual before using the machine in order to know how the
machine works and what its limitations are.
– Always make sure that all protections are mounted on the machine and that the machine is
connected to a dust extraction installation. Also provide sufficient space around the machine and
good lighting in the workshop.
– When changing the tools or when doing a maintenance job, the machine must always be
disconnected from its power supply.
– Knives and tools which are not correctly sharpened or are in bad condition not only diminish the
quality of the work provided, but also increase the risk of accidents.
– Always wear adapted clothing
– Keep children away from the machine and the workshop.
– To avoid hearing damage it is recommended to wear ear protection when working with the
– machine.
Danger list
This list was based on parts 1 and 2 of EN 292 and annexe A of part 2.