Technical data

USAGE

The hood is fitted with a control box

behind the opening, containing 3

controlside (fig.1).

- Slide “L” is used to switch the lighting on

and off.

- Slide “M” is used to start or stop the fan,

confirmed by a power on indicator.

- Slide “V” is used to select the extraction

power from “1” to “3”.

A contactor above the control box cuts

off the power as soon as the auvent is

fully closed, but functions previously

regulated with the slides are maintained.

MAINTENANCE

Before carrying out any work (cleaning -

changing filters - lighting), switch the

appliance off by pulling the plug out if you

can reach it, or by switching the circuit

breaker off.

Grease filter

The metal grease filter should be cleaned

every two months with normal usage and

can be cleaned in a dishwasher or by

hand using a mild detergent or liquid

soap.

Proceed as follows: (see fig.2 - fig.3)

- Open the auvent to the end stop.

- Remove the filters one at a time,

pushing the handle towards the rear

of the hood.

When replacing, ensure that the

handle faces outwards.

NOTE: new grease filters can be

obtained from your dealer.

Active carbon filters

(on appliance used in recycling version).

- Air drawn in also passes through the active carbon filter designed to eliminate cooking

odors.

- This filter cannot be cleaned, and therefore must be replaced at a frequency which

depends on the frequency of use (about twice per year).

106_01FA

106_03FA