User Manual

NCBox-189 10
B. BIOS Error Message –
BIOS error message appear when my NCBox starts
If the BIOS error message appears, press any key to resume or, hit <DEL> to enter
BIOS setup main menu, follow these steps:
1. Press <DEL>, and the BIOS Setup main menu appears, check if CF Card is
detected at “Pri Master”. If it is not detected, use Direction keys <↑↓> to choose
“AUTO” and then go back to the main menu by pressing <ESC>. Move your
cursor down with Direction keys <↓>, and choose “Save Settings and Exit”, a
message dialog appears as seen below, hit <Enter>.
“Save current settings and exit (Y/N)? Y”
2. Go to “Exit” menu using the Direction keys <↑↓> and choose the option “Load
Optimal Defaults”, then press <Enter>. A message dialog appears as seen
below, hit “Y” key and press <Enter> to save and recover to the factory setting.
“Load Optimal Defaults (Y/N)? Y”
(BIOS Setup menu “Exit”)