User Manual

NCBox-189 11
C. “Operating System Not Found” –
A message indicating that “Operating system not found” appear when my NCBox
starts
Enter your BIOS setup main menu by pressing <DEL> key, be sure that the C: drive
is enable.
If OS still does not start, follow these steps to initialize the BIOS:
1. Turn off the NCBox-189.
2. Remove any peripheral devices connected to the NCBox-189.
3. Restart the NCBox-189..
4. Press <DEL> to enter BIOS Setup main menu window.
5. Follow the steps as written in item B. BIOS error message.
WARRANTY : TERMS AND CONDITIONS
1. Warranty
The warranty terms for NCBox-189 are twelve (12) months from the beginning on the
date of invoice. During the warranty period, DMP Electronics Will repair replace the
product covered under this limited warranty.
2. Service and Support
DMP Electronics Inc. provides the technical support for hardware problems with your
system throughout the warranty period. The technical support service is limited to
configuration and operation of NCBox-189 sold by DMP Electronics Inc. The technical
support service does not offer software tutoring or training.
3. Return Merchandise Authorization（RMA）policy
If the DMP staff or dealer determines that a part is defective. Purchaser must call our
technical support service to obtain an RMA number before attempting to return any part.
Please refer to your nearest dealer for