Use and Care Guide

48 49
E. Finish Installing the Perimeter Wire
Insert the remaining pegs along the Perimeter Wire, approx.
1 m (3.3 ft) apart.
Hammer the extension cable into the ground so it’s not a
tripping hazard.
Don’t worry if your lawn looks patchy for the first few days.
It will even out after the first few mows!
• The Safety Switch should be set to ‘On’ during charging
• Don’t touch the blades
• Never mow when people, especially children or pets,
are nearby
• Make sure the lawn is clear of debris
F. Charge your mower
Place your mower on the Base Station and let it fully charge
before its first mow (up to 24 hours). Once it is fully charged, it
willl depart automatically according to its mowing schedule.
TIP