Quick start guide For RC / MC Models Follow me! Watch the Video
Wire Setup Chapter numbers mentioned in this Guide refer to the Operating & Safety Manual Carefully read and review all safety instructions, warnings and cautions contained in the Operating & Safety Manual. 2 5 Main Zone 1 Sub-Zone 1 3 Main Zone 5 Separated Zone A 1 4 1 What Does Your Lawn Look Like? Chap. 3.1 Chap. 3.1.1 2 Base Station Location Chap. 3.2 Chap. 3.1.2, 4.3.3 3 Wire Direction & Distance Chap. 4.2.1 Chap. 3.1.3 4 Corners Chap. 4.2.
Base Station Installation 6 7 Finish Chap. 4.5 8 Connect the Plot Connector Chap. 4.6 Insert 2 Pegs Chap. 4.6 Connect the wire Power Box Installation 9 10 Chap. 4.6 Chap. 4.7 11 9 10 Connect 15cm extension cable 11 Chap. 4.7 Mount Bracket One-Time Setup 12 13 Turn Safety Switch ON Scroll 14 Operating Panel Chap. 5.2.1 Choose / Confirm Choose Measurements Units Chap. 5.2.2 Scroll Meter Celsius 24 Hours 15 Foot Fahrenheit 12 hours (AM / PM) Set Day & Time Chap. 5.2.
19 20 Possible Error Messages: Test Wire Position Chap. 5.2.6 Add Pegs Chap. 5.2.7 Adjust wire Press OK Reference 21 Set Cutting Height Chap. 5.1 Sharp Blade Cutting Height Indicator Safety Switch off OK to choose / approve selection Mowing with Edge / Left arrow Mowing without Edge / Right arrow GO to Base (home) Settings Docking Indicator On/Off Button Operating Indicator Wire Indicator DOC7002C Stop (during operation) / Back (while in menu) For all RS models: For all MS models: AT.