Use and Care Manual

8 9

G. Maintenance and special instructions

1. Always switch off the Safety Switch before clearing

blockage/checking/cleaning/working on the mower,

or after striking a foreign object to inspect the

machine for damage. Never attempt to service or

adjust the mower while it is in operation.

2. In case of abnormal vibrations, stop the mower,

switch off the Safety Switch and check for any

damage of the blade. Replace a worn or damaged

blade (Part No. MRK6101A) to preserve balance. If

the vibration continues, call for service.

3. Use heavy gloves when inspecting or servicing the blade.

4. Do not perform maintenance barefoot or wearing

open sandals. Always wear suitable work shoes

and long trousers.

5. Replace worn or damaged parts for your safety.

6. Use only original equipment and accessories. It is not

permitted to modify the original design of the mower.

All modiﬁcations are made at your own risk.

7. Ensure that only replacement cutting means of

the right type (Part No. MRK6101A) are used.

8. Maintenance/servicing/cleaning of the mower should

be according to manufacturer’s instructions.

9. Keep all nuts, bolts and screws tight to be sure

the machine is in safe working condition.

WARNING!

When there is a risk of a lightning storm, disconnect

the Perimeter Wire from the Base Station /Perimeter

Switch and the Power Supply 230 V/120 V plug from

the power outlet.