Operation Manual

8
G. Maintenance and special instructions
1. Always switch Robomow off and remove the Disabling
Device before clearing blockage/checking/cleaning/
working on it, or after striking a foreign object to inspect
the machine for damage. Never attempt to service or
adjust the mower while it is in operation.
2. In case of abnormal vibrations, stop the mower, switch
it off and check for any damage of the blade. Replace
a worn or damaged blade (Part No. MRK9100A) to
preserve balance. If the vibration continues, call for
service.
3. Use heavy gloves when inspecting or servicing the blade.
4. Do not perform maintenance barefoot or wearing open
sandals. Always wear suitable work shoes and long
trousers.
5. Replace worn or damaged parts for your safety.
6. Use only original equipment and accessories. It is not
permitted to modify the original design of Robomow. All
modifications are made at your own risk.
7. Ensure that only replacement cutting means of the right
type (Part No. MRK9100A) are used.
8. Maintenance/servicing/cleaning of Robomow should be
according to manufacturer’s instructions.
9. Keep all nuts, bolts and screws tight to be sure the
machine is in safe working condition.
WARNING!
When there is a risk of a lightning storm, disconnect
the Perimeter Wire from the Base Station and the
Power Supply 230 V/120 V plug from the power outlet.