Operation Manual

41
Enabling child protection
Child protection prevents accidental use of Robomow by little children.
When child protection is enabled, Robomow will require a special
combination to start a mowing operation or to go back to its base.
To enable child protection, press and hold the GO + STOP buttons
together for 6 seconds.
If you wish to disable child protection, press
and hold the GO + STOP buttons together for 6
seconds again.
Alternatively, child protection can be enabled or
disabled conveniently via the mobile app (RX20
Pro and RX20u models only).
Powering up Robomow
To power up Robomow, press and hold the GO button for 2 seconds until
the ON/OFF indication is lit.
When you need to switch Robomow off, simply press and hold GO button
for 2 seconds, until the ON/OFF indication goes off.
Note: If the theft protection is
enabled (RX20 Pro/RX20u models),
you will need to unlock your
Robomow via the mobile app
before you can switch it off.
2 seconds
6 seconds