Operation Manual

EN
28
Figure 2.2
Weekly program menu
Figure 2.3
Weekly program set by area
Zone setup
Settings
Information
Service
Weekly program
Work time
External Base
Update program
Program type
Program on/off
Display program
2.1
2.2
2.1.1
2.1.2
2.1.3
2.1.1.1
2.1.1.2
2.1.1.3
2.1.1.4
2.3
2.4
Zone setup
Settings
Information
Service
Weekly program
Work time
External Base
Update program
Program type
Program on/off
Display program
2.1
2.2
2.1.1
2.1.2
2.1.3
2.1.1.1
2.1.1.2
2.1.1.3
2.1.1.4
2.3
2.4
Set by area
Set by days
Base zone area
Press GO
100 – 150 m²
Confirm
200 – 250 m²
Confirm
Start: 13:00
Next digit
Start: 14:00
Confirm
Press ‘GO’ to confirm
Scroll ‘UP’ to choose the
lawn area connected to
the Base Station
Press ‘GO’
Scroll to set the start time
and press ‘GO’to confirm
(the ‘Start time’ is the
same for all days)
Set by area
Set by days
Base zone area
Press GO
100 – 150 m²
Confirm
200 – 250 m²
Confirm
Start: 13:00
Next digit
Start: 14:00
Confirm
Press ‘GO’ to confirm
Scroll ‘UP’ to choose the
lawn area connected to
the Base Station
Press ‘GO’
Scroll to set the start time
and press ‘GO’to confirm
(the ‘Start time’ is the
same for all days)
2.1 Zone setup
The ‘Zone setup’ menu allows user to set different parameters of the zone.
2.1.1 Weekly program
The ‘
Weekly program’ menu consists of four options (figure 2.2):
a. Update program
– allows updating the program and changing the settings.
b. Program type
– allows setting the program type, when every type gives a different level of
the parameter the user can set (more details will follow).
c. Program on/off
- Allows user to shut off the weekly program when setting the ‘Program’ to
‘off’. A shortcut to shut off the weekly program is by pressing the main switch while Robomow
is in the Base Station. It will set the program to 'off' but will allow manual start by pressing the
GO button as well as charging.
d. Display program
- the weekly program display is used to show the active days and additional
information about the last week operations (more details will follow).
 Program type
There are two types of weekly programs that can be set by the user:
- Set by area:
Define the area size of the zone connected to the Base Station and the start time, at
which you wish Robomow to start mowing; Robomow will determine the most efficient
weekly program to your lawn based on the area given. Follow the screens and the
instructions below (figure 2.3) to set weekly program by area: