Operation Manual

EN
29
Figure 2.4
Weekly program set by days
M+ T+ W+ T- F+ S- S-
R m
M+ T+ W+ T- F+ S- S-
R m
Figure 2.5
Weekly program display
Set by area
Set by days
M+ T- W- T- F- S- S-
Next day
Start: 13:00
Next digit
Start: 14:00
Confirm
Press ‘GO’ to confirm
Scroll UP/DOWN to set
the work time and press
‘GO’to confirm
The cursor indicates the day
to be set; Use the
UP/DOWN arrows to
change the day status, when
‘+’ is for active day; Press
‘GO’ to move to the next day
Scroll to set the start time
and press ‘GO’to confirm
(the ‘Start time’ is the
same for all days)
M+ T- W+ T- F
+ S- S-
Next day
M+ T- W+ T- F+ S- S-
Confirm
Work time
Press GO
Max
Confirm
1:30
Confirm
Press ‘GO’to set the
working time
Set by area
Set by days
M+ T- W- T- F- S- S-
Next day
Start: 13:00
Next digit
Start: 14:00
Confirm
Press ‘GO’ to confirm
Scroll UP/DOWN to set
the work time and press
‘GO’to confirm
The cursor indicates the day
to be set; Use the
UP/DOWN arrows to
change the day status, when
‘+’ is for active day; Press
‘GO’ to move to the next day
Scroll to set the start time
and press ‘GO’to confirm
(the ‘Start time’ is the
same for all days)
M+ T- W+ T- F
+ S- S-
Next day
M+ T- W+ T- F+ S- S-
Confirm
Work time
Press GO
Max
Confirm
1:30
Confirm
Press ‘GO’to set the
working time
When setting weekly program by area, the active days will be as shown in the table below.
Active days per area
Area m
2
Mon Tue Wed Thu Fri Sat Sun
0-50
я я
50-100
я я
100-150
я я я
150-200
я я я я
200-250
я я я я я
250-300
я я я я я я
300 and up
я я я я я я я
- Set by days:
Select the days in which you wish Robomow to operate. Define the start time and the
work time, which are common to all active days; Follow the screens and the instructions
below (figure 2.4) to set weekly program by days:
 Display program
The weekly program display (figure 2.5) is
used to show additional information about
the last week operations
except of the ‘+’
for the active days.
Shortcut buttons
To display the program, press the
‘UP’ arrow while Robomow is in the Base Station.
The program is displayed for 10 seconds before changing back to the main display.
To update the program, press the
‘GO’ button within the 10 seconds that the program is
displayed.