Installation Guide

ManualsBrandsRoboReel ManualsTools & HardwarePortable Air Hose Reel with 40-ft Hose

Roboreel

Portable Air Hose Reel 1-888-GR8-STUFF

Quick Start Guide – Page www.roboreel.com

This Quick Start Guide does not replace the User Guide. For complete details and precautions concerning this product, read all instructions in the User Guide provided

CAUTION: The Air Hose System is rated for dry, indoor use only.

DO NOT OPERATE IN WET ENVIRONMENT

IF YOU HAVE ANY QUESTIONS OR DIFFICULTIES CALL OUR CUSTOMER SUPPORT TEAM: 1-888-GR8-STUFF

1. Connect Power

1. Plug Power Entry Cable securely into AC outlet.

* The unit will emit a tune, indicating it is ready to use

1. Connect Air Input Hose to air supply

CAUTION: DO NOT EXCEED 300 PSI PRESSURE

3. Connect Air Tool

1. Connect air tool / device to Quick Coupler

2. Extract hose / tool to desired working length

1. Disconnect tool from Quick Coupler by pulling

down then pushing upward on coupler.

2. Press Remote or Dome Retract Button to reel in

hose

pull

first

then

push

Reel Parts Diagram

2. Connect Air Supply

4. Remove Tool / Retract Hose

Doc. No. 070-000139-01, Rev 1

Summary of content (2 pages)

PAGE 1
Roboreel® Portable Air Hose Reel 1-888-GR8-STUFF Quick Start Guide – Page www.roboreel.com 1 IF YOU HAVE ANY QUESTIONS OR DIFFICULTIES CALL OUR CUSTOMER SUPPORT TEAM: 1-888-GR8-STUFF Reel Parts Diagram 1. Connect Power 1. Plug Power Entry Cable securely into AC outlet. * The unit will emit a tune, indicating it is ready to use 2. Connect Air Supply 1. Connect Air Input Hose to air supply CAUTION: DO NOT EXCEED 300 PSI PRESSURE 3. Connect Air Tool 4. Remove Tool / Retract Hose 1.
PAGE 2
Roboreel® Portable Air Hose Reel 1-888-GR8-STUFF Quick Start Guide – Page www.roboreel.com 2 IF YOU HAVE ANY QUESTIONS OR DIFFICULTIES CALL OUR CUSTOMER SUPPORT TEAM: 1-888-GR8-STUFF 5. Bench Mount (included) Instructions 1. Attach Bench Mount Bracket to work surface using two (2) black wood screw (included) as shown in Fig 1a 2. Insert leg bar into mount (1) and then pull reel forward to secure it (2) 6.