PINGPONG ROBOT G SERIES G PINGPONG ROBOT G SERIES Manual Book G S ER I E S M anual B o o k G SERIES www.roborisen.
PINGPONG ROBOT G SERIES G
PINGPONG ROBOT G SERIES PINGPONG ROBOT G SERIES Product Composition Robot operation, App function Assembly flowchart 1. G2 2. G3 3. G4 4. G6 User’s Manual 1. Product Introduction 2. PingPong robot (Cube) 3. Operation of Button 4. Matters Related to Charging 5. Connection to Smartphone G G2. AUTO CAR ROLLING CAR WORM BOT G3. BATTLE BOT DRAWING BOT HUMAN BOT G4. CRAWING BOT DANCING BOT OMNI BOT ROBOT ARM G6. HEX BOT TWIST BOT(6) BIPED BOT G SERIES www.roborisen.
Composition : G3 Link only Composition: G2 Link only LINK LINK PINGPONG G2 Link Box PINGPONG G3 Link Box Link 8 EA Link 17 EA 1 1 2 1 1 2 2 1 C2-13 C2-09 C1-13 C2-08 C2-07 WL-04 MD-01 C1-03 1 1 C1-20 1 2 C1-05 1 1 C2-04 2 C2-05 ET-01 C2-15 C1-09 1 1 2 2 C2-13 C1-04 MD-01 WL-04 1 C1-19 1 C1-02 1 C3-02 PINGPONG G SERIES G
Composition: G4 Link only Composition: G6 Link only LINK LINK PINGPONG G4 Link Box PINGPONG G6 Link Box Link 24 EA Link 31 EA 1 C2-02 1 2 C2-06 1 1 C2-14 1 1 C4-01 1 4 MD-01 2 4 C2-02 ET-12 4 MD-05 MD-06 1 C1-21 MD-07 2 C1-12 MD-08 2 C2-11 C1-09 C1-08 2 C1-10 1 2 C4-04 2 6 C2-13 1 C2-15 2 C1-12 2 C2-08 1 2 C1-15 2 C4-03 C1-16 3 C2-13 C1-17 1 C1-18 PINGPONG G SERIES G
Composition: G2 Full set Composition: G3 Full set full full PINGPONG G2 Full set PINGPONG G3 Full set Link 8 EA 1 C2-13 Cube 2 EA 1 C2-09 PINGPONG G SERIES 2 C1-13 1 C2-08 1 C2-07 2 Link 17 EA 1 C1-03 WL-04 1 Charging Cable Cube 3 EA 1 C1-20 1 C2-05 ET-01 1 1 C2-13 C1-04 2 C1-05 1 C2-15 1 C2-04 2 C1-09 2 WL-04 1 C1-19 1 C1-02 1 C3-02 Charging Cable G
Composition: G6 Full set Composition: G4 Full set full PINGPONG G6 Full set Cube 4 EA Link 24 EA C2-02 1 2 C2-06 1 1 C2-14 1 1 C4-01 1 4 MD-01 Link 31 EA 4 MD-05 MD-06 1 C1-21 MD-07 2 C1-12 MD-08 2 C2-11 Cube 6 EA 2 4 C2-02 ET-12 2 6 C1-09 C1-08 2 C1-10 1 2 C4-04 G full PINGPONG G4 Full set 1 PINGPONG G SERIES C2-13 1 C2-15 2 C1-12 Charging Cable 2 C2-08 1 2 C1-15 2 C4-03 C1-16 3 C2-13 C1-17 1 C1-18 Charging Cable
PINGPONG ROBOT G SERIES Product Introduction 1 User’s Manual 1. Product Introduction 2. PingPong Robot (Cube) 3. Operation of Button 4. Matters Related to Charging 5. Connection to Smartphone PINGPONG ROBOT (CUBE) 2 LINK 3 CHARGING CABLE PINGPONG G SERIES G This is the basic module of PingPong Robot, which is called “Cube.” The button, various sensors and 4-pin expansion port are built in Cube.
PINGPONG ROBOT (CUBE) Operation of Button PINGPONG G SERIES 1. Turning On Magnetic Charging Terminal If you press the button once briefly when the power is off, PingPong Robot is turned on. Infrared Proximity Sensor Beep! Button Connection & Charging Indicator Click 2.
Matters Related to Charging Tap! You can charge PingPong Robot using the Magnet Charging Cable built in the box. When charging USB, use a rated 5V/3A dedicated charger. When using a USB port of laptop or PC, there is a concern of terminal damage. Several Cubes can be charged at a time connecting together. It takes about an hour from 1 to 6 Cubes to the full charge, and takes more time for 7 Cubes for more. Flash- Connection to Smartphone PINGPONG G SERIES 1.
Connection to Smartphone 3. Run the application and select two Cubes on the screen. (e.g. AUTO CAR) Connection to Smartphone PINGPONG G SERIES G 5. Assemble it by referring the development view or the assembly flow chart. The assembly flow chart is at the last of the manual, and there are the assembly sequences of all the robots that can be assembled in this series.
PINGPONG G SERIES Connection to Smartphone Connection to Smartphone 6. Find the first Cube on the Smartphone screen. 8. When connected, the color of first Cube turns red on the application screen. 7. After turning on the power by pressing briefly the first Cube, press the button once more to connect. 9. At the same time, the LED indicator on the left Cube flickers in red.
Connection to Smartphone PINGPONG G SERIES App Operation G Moving with a joystick 10. Connect the second Cube in the same way. It turns on If you press once briefly when it is turned off, and PingPong Robot makes an attempt to connect with the device if you press it once more when it is turned on. You can control the Auto Car by pressing the button. Press the left arrow key to move in straight, and press the blue circle to stop.
App Operation App Operation Drawing the basic figure PINGPONG G SERIES G Motion Maker (To create motion) If you press the desired figure, it moves according to the specified figure. In case of Drawing Bot, you will draw a figure by lowering and lifting a pen. It is the menu to create the desired motion and move the PingPong Robot at will.
App Operation App Operation PINGPONG G SERIES G Motion Maker (To change the sequence and to play) Motion Maker (To modify motion) By pressing the motion icon in the execution area, you can change the values (movement distance, rotation angle and waiting time) for each motion. If you press the motion icon that you want to change and move it to another place, the sequence of motion is changed. Execution Area If you press the play button, the PingPong Robot moves in the order of the icons.
App Operation Motion Maker (To delete motion) You can delete unnecessary motion by pressing the trash button. When deleting is completed, press the trash button again to clear the delete mode. New Clearing all the motions in the execution area and creating the new ones.. Play Invoking the saved motion. Open Robot operation and App function PingPong Robot moves according to the sequence of the icons in the execution area.. Stopping the motion of a moving PingPong Robot.
PINGPONG G2 AUTO CAR PINGPONG G2 ROLLING CAR Links PINGPONG G SERIES Cubes Links Assembly Assembly App functions App functions Cubes G
PINGPONG G3 BATTLE BOT PINGPONG G2 WORM BOT Links Assembly App functions PINGPONG G SERIES Cubes Links Assembly App functions Cubes G
PINGPONG G3 HUMAN BOT PINGPONG G3 DRAWING BOT Links PINGPONG G SERIES Cubes Links Assembly Assembly App functions App functions Cubes G
PINGPONG G4 OMNI BOT PINGPONG G4 CRAWING BOT Links Assembly App functions PINGPONG G SERIES Cubes Links Assembly App functions Cubes G
PINGPONG G4 DANCING BOT PINGPONG G4 ROBOT ARM Links Assembly App functions PINGPONG G SERIES Links Cubes Assembly App functions Cubes G
PINGPONG G6 HEX BOT PINGPONG G6 TWIST BOT(6) Links Assembly App functions PINGPONG G SERIES Cubes Links Assembly App functions Cubes G
PINGPONG ROBOT G SERIES PINGPONG G6 BIPED BOT G Assembly flowchart Links Assembly Cubes G2. AUTO CAR ROLLING CAR WORM BOT G3. BATTLE BOT DRAWING BOT HUMAN BOT G4. CRAWING BOT DANCING BOT OMNI BOT ROBOT ARM App functions G6. HEX BOT TWIST BOT(6) BIPED BOT G SERIES www.roborisen.
PINGPONG G2 AUTO CAR ASSEMBLY 1 2 C2-08 C2-13 PINGPONG G SERIES 3 G 4 WL-04 MD-01 C2-07 Direction Assemble a round link(C213) according to the shape of figure and the position of button. Combine the rod Link (C2-08) on the upper side and Ball Caster (C2-07) on the bottom. Combine the Acceleration Gear (MD-01) nearby the Cube. If the Link does not enter well, turn the cross (+) shape of the gear to adjust the groove of the motor. Connect the Wheel (WL-04) to the Acceleration Gear.
PINGPONG G2 ROLLING CAR ASSEMBLY 1 2 PINGPONG G SERIES 3 MD-01 MD-05 C2-09 According to the shape of figure and the position of button, combine the first Cube on the long side of Htype Link (C2-09), and combine the Second Cube on the short side. Combine the Acceleration Gear (MD-01) with second Cube (short Link). If the Link does not fit well, turn the cross (+) shape of the gear to adjust the groove of the motor. Connect the Wheel (MD-05) to the Acceleration Gear.
PINGPONG G2 WORM BOT ASSEMBLY 1 2 PINGPONG G SERIES 3 4 C1-13 C2-13 Assemble a round link(C2-13) according to the shape of figure and the position of button. Connect the Link (C2-13) in the middle of Cube. Connect foot Links (C1-13) to two Cubes. Before moving, lay Worm bot on its side as shown in the picture below.
PINGPONG G3 BATTLE BOT ASSEMBLY 1 2 3 PINGPONG G SERIES 4 G 6 5 WL-04 MD-01 C2-13 C1-19 C1-03 C3-02 Assemble the link(C213) according to the shape of figure and the pos ition of button. Combine the Acceleration Gear (MD-01) on both sides. If the Link does not enter well, turn the cross (+) shape of the gear to adjust the groove of the motor. Inset the wheel into the Acceleration Gear. Combine Link(C3-02) according to the shape Attach Cube according to the position of the figure shape.
PINGPONG G3 DRAWING BOT ASSEMBLY 1 2 3 PINGPONG G SERIES 4 6 5 C1-02 G WL-04 ET-01 C1-20 (Pen Holder) C2-05 Direction C2-04 Assemble a tube link (C2-05) according to the shape of figure and the position of button. Attach the Link (C2-04) under two Cubes. Combine the Link (ET-01). Attach the Pulley Link (C1-20) and the Pen Holder Link (C1-02). Insert the assembled third Cube onto the Link (ET-01). Attach the Wheel (WL04) to both sides of Step 5 Cube.
PINGPONG G3 HUMAN BOT ASSEMBLY 1 2 3 PINGPONG G SERIES 4 5 C2-15 C1-04 C1-09 C1-05 Combine two Links (C109) with small screws. Attach two Cubes to the Link (C1-09). Assemble it according to the shape of button. Attach the Link (C2-15) to the top of the Cube. Attach two Links (C1-05) to be the legs on both sides. Assemble it according to the shape of figure and the position of button. Attach the Link (C1-04) to the Cube.
PINGPONG G4 CRAWING BOT ASSEMBLY 2 1 PINGPONG G SERIES 3 4 C2-11 C2-13 Assemble a round link (C2-13) according to the shape of figure and the position of button. Attach two Links (C2-11) to Cube. Assemble Cube according to the shape of figure and the position of button. Complete the robot.
PINGPONG G4 DANCING BOT ASSEMBLY PINGPONG G SERIES C2-02 2 1 3 4 C2-06 C2-14 C1-12 Assemble it according to the shape of figure and the position of button. Attach two Links (C2-06) to the Cube. Attach both Cubes. Attach leg links (C1-12) to the Cube.
PINGPONG G4 OMNI BOT ASSEMBLY PINGPONG G SERIES 2 1 3 MD-01 C4-04 Assemble it according to the shape of figure and the position of button. 4 MD-05 C4-01 Attach Link (C4-01) to the Cube. Assemble four Acceleration Gears (MD-01) to the Cube according to the position. Attach the Wheel (MD-05) to the Acceleration Gear.
PINGPONG G4 ROBOT ARM ASSEMBLY 1 2 3 PINGPONG G SERIES 4 G 5 MD-08 MD-06 C2-15 MD-07 C1-21 Assemble it according to the shape of figure and the position of button. Attach Link (MD-07) to the Cube. Attach Link (MD-06) to the Cube. Attach Link (MD-08) to the Cube.
PINGPONG G6 HEX BOT ASSEMBLY 1 2 3 PINGPONG G SERIES 4 5 C1-16 C1-18 C1-16 C1-15 C1-17 C2-13 Assemble the three links (C2-13) according to the shape of figure and the position of button. C4-03 Attach two links(C4-03) in between twin cubes. C2-08 Add two links(C2-08) in front & back of robot. C1-15 Attach the links(C1-15, C1-16) to the front & hind legs, and the rest links(C1-17, C1-18) to the middle legs. Assembly completed.
PINGPONG G6 TWIST BOT(6) ASSEMBLY PINGPONG G SERIES ET-12 C1-12 2 1 4 3 ET-12 C1-09 C2-13 C1-09 ET-12 C1-09 C1-09 Assemble three links (C2-13) according to the shape of figure and the position of button. ET-12 With screws, assemble square link(ET-12) and leg link(C1-12) to the front & back, and two joint links(C1-09) and a square link(ET-12) to the middle. Attach combined links to the cubes. Be aware of the shape of figures. Assembly completed.
PINGPONG G6 BIPED BOT ASSEMBLY 3 2 1 PINGPONG G SERIES 4 C1-10 C2-03 C1-09 C1-08 With screws, assemble the links(C1-10 to C109), and two links(C109). Be aware of its positions. Assemble four combined links according to the shape of figure and the position of button. Attach two plate links (C2-03) to the front and back of the robot, and two foot links (C1-08) to the bottom. Assembly completed.
PINGPONG ROBOT G SERIES G G SERIES www.roborisen.
