Use and Care Manual

08
A1
Vacuum Cleaner
A1-1—Handle
A1-2—LED Display
A1-3—Clean Tank Release
A1-4—Clean Tank
A1-5—Dirty Tank Release
A1-6—Dirty Tank
A1-7—Cleaning Head
A1-8—Splash Guard Lift Toggle
A1-9—Roller
Product Introduction
Product Installation
A
B
A2
Screen Functions
B1
Setting Up the Vacuum
Cleaner
B2
Charging Dock Installation
A3
Drying & Charging Dock
A4
Power Supply
A5
Filter
A6
Maintenance Brush
A7
Dirty Water Tank Cover
B1-1—
B2-1—
B2-2—
B2-3—
B1-2—
A3-1—Body
A3-2—Tray
A7-1—Water Level Sensors
Self-Clean
Change Mode
Power
Press: Standard mode
Press and hold for 2s: DEEP mode
 Off: WiFi disabled
 Flashing slowly: Waiting for
connection
 Flashing quickly: Connecting
 Steady on: WiFi connected
Press: Switch to AUTO/MAX/Floor Drying/
ECO mode
Press: Start/Pause
Press and hold for 2s: Switch off
Press while charging: Start/Stop drying
Insert the handle into the vacuum body
until it clicks in place. The power button
should face forward.
Align the charging dock tray with
the charging dock body, press down,
making sure they are firmly secured.
Connect the power supply into the
bottom of the charging dock and plug it
in. Power cable can exit from either side.
To disassemble the charging dock,
grasp the side handles of the tray and
pull upward.
To remove the handle, remove the
clean tank and then gently pull the
handle while pressing the release
button on the vacuum body.
A2-1—ECO Mode
A2-2—Charging
A2-3—Battery Level
A2-4—Clean Tank Empty
A2-5—Dirty Tank Full
A2-6—Dirt Level
A2-7—AUTO Mode
A2-8—MAX Mode
A2-9—Floor Drying Mode
A2-10—WiFi Indicator
A2-11—Error
A2-12—Drying
A2-13—Self-Cleaning
Connecting to the App
Download the App
Reset WiFi
Search “Roborock” in the App Store or Google
Play or scan the QR code below to download
and install the app.
a. Keep the machine upright and press
to
light up the screen and enter standby mode.
b. Press and hold
and until you hear
the “Resetting WiFi” voice alert. The reset is
complete when the WiFi indicator flashes
slowly. The vacuum cleaner will then wait for
a connection.
If the mobile phone fails to connect to the vacuum
cleaner because your router configuration has changed or
you forget your password or for any other reasons, reset WiFi
and add your device again.
Note: