User Manual

Basic Operation
RoboSHOOT
+
©
User Manual Page 10
Specifications (Blue denotes X-20
+
only)
Supported
Cameras
Most Fujifilm X-Series cameras.
Supported
Speedlights
See compatibility table on
www.sereneautomation.com
Supported Nikon
speedlights
See compatibility table on
www.sereneautomation.com
Sync Speed
Per camera limits (Max Curtain 1/250, HSS
1/8000, Leaf 1/2000)
Flash Groups
4 TTL groups (3 In-Camera), +/- 5 EV
TTL Override
+/- 5 EV exposure adjust from TTL
All Flashes
Fully TTL Controlled – configurable group
Timer Config*
Exposure Counter, Initial Delay
Intervalometer
Config*
Exposure Counter, Initial Delay, Interval,
Duration, Profile Bracketing
High-Speed Flash
Config*
Mode (Proportional/Fixed delay), Exposure
Duration, Delay from trigger, Shutter Mode
Trigger Module
Settings*
Trigger Assignment, Trigger Source,
Sensitivity, Sensor select. (optional)
Batteries
2 AAA
Battery Life
Unit on and operational - typical 12 hours
Unit in standby – typical 5 days
Size (LxWxH)
3.3 x 1.7 x 0.9 in (84 x 43 x 23 mm) + 1/2 in
(13 mm) for shoe mount
Weight (no
batteries)
Master - 2 oz (56 g), Slave 1.8 oz (50 g)
Master-Slave
Range
Approximately 45-60 ft (depending on
settings and environment)
Radio
2.4GHz Globally License Free ISM Band
Conformance
FCC, CE, IC, RoHS for distribution in United
States, Canada, and European Community.
App Support
iOS
©
8.3 or later. Android
©
4.0 or Later.
Specifications Subject to change without notice.
* Requires App (MX-20
+
only)