User Manual

Basic Operation
RoboSHOOT
+
©
User Manual Page 14
Camera Settings
Any camera setting that works with an external
speedlight will be a good place to start. Consult the
owner’s manual for your camera when in doubt.
Typically, settings similar to below should be used:
 Start with Single Frame Modes - Single, multiple-
exposure, or special effects. Panorama, Video
modes, and others may disable flash.
 Use Standard Flash Modes - Forced, 2
nd
Curtain,
or Slow Synchro. It is suggested not to use
Suppressed Flash: instead use the RoboSHOOT
©
Flash Enable/Disable buttons for this.
AutoFP/HSS is supported with compatible
cameras and speedlights.
 Flash Exposure Compensation – The camera and
App provide flash compensation settings. They
are additive. Use whichever you find most
convenient. We recommend against using
compensation provided on the speedlight itself.
 Shutter Speed – Some X series cameras support
flash sync up to 1/250s (leaf shutter cameras up
to 1/2000s). The RoboSHOOT devices easily
cover this range. If your camera and speedlight
support HSS, speeds up to 1/8000s are possible.
 The most creative results are usually achieved in
Aperture Priority, Shutter Priority, and especially
Manual Camera Modes.