User Manual

Basic Operation
RoboSHOOT
+
©
User Manual Page 20
The Trigger/Sensor port is used to initiate a timing
function (Timer / Intervalometer), Profile Bracketing,
or High Speed Capture sequence. A sensor or switch
contact can be used to act as trigger. A detailed
specification for this port is available for those who
wish to provide a custom sensor or trigger device.
RX-20 Port
The External Flash Sync port on the RX-20 provides
an optically isolated interface for low voltage sync
inputs. This is used as either a shutter release for
additional cameras for multi-angle photography* or
to trigger external Low Voltage Strobes – Use only as
recommended by the strobe manufacturer and in
conjunction with RoboSHOOT© safety guidelines.
We strongly recommend use with a voltage isolator
intended for external strobes and never connect
directly to strobe unless it is known to be
compatible.
* New Feature – see Device Admin for details.
MX-20
+
/ RX-20