User Manual

App Control
RoboSHOOT
+
©
User Manual Page 37
App Start-up
You will be presented a connect screen after the App
starts much like this:
From here, you can set App
and Device level settings or
just connect. Any settings
changes you make will be
saved for the next time you
run the App. If no device is
available, Demo Mode will
run. In Demo Mode,
connection is simulated and
an info view with text
bubbles will show how to navigate. In this mode, no
device interactions will take place and the screens
will be somewhat static.
Forcing Settings Consistency
The App can be used to maintain the same settings in
each MX unit. This is done by forcing settings update
upon connect by selecting “All Settings” of the
“Update Upon Connect” App Setting. Otherwise,
those App Settings may not reflect the current device
settings. These settings are found by pressing the
“App Settings” button on the App prior to connecting
to a device.
MX-20
+