User Manual

Basic Operation
RoboSHOOT
©
User’s Manual Page 20
The Trigger/Sensor port is used to initiate a timing
function (Timer / Intervalometer), Profile Bracketing,
or High Speed Capture sequence. A sensor or switch
contact can be used to act as trigger. A detailed
specification for this port is available for those who
wish to provide a custom sensor or trigger device.
RX-20 Port
The External Flash Sync port on the RX-15 provides
an optically isolated interface for low voltage sync
inputs. This is used to trigger external Low Voltage
Strobes – Use only as recommended by the strobe
manufacturer and in conjunction with
RoboSHOOT© safety guidelines. We strongly
recommend use with a voltage isolator intended for
external strobes and never connect directly to
strobe unless it is known to be compatible.
MX-20 / RX-20