CL 52 E
DECLARATION OF CONFORMITY Robot-Coupe SNC: Declares that the machines identified by their type above, comply with: • The essential requirements of the following European directives and with the corresponding national regulations: - Directive «Machinery» 2006/42/EC, - Directive «Low voltage» 2006/95/EC, - Directive «Electromagnetic compatibility» 2004/108/EC, - Regulation (EC) n°1935/2004 «Materials and articles intended to come into contact with food», - Regulation (EU) n°10/2011 «Plastic materials and a
WARRANTY Eng SUMMARY MAINTENANCE • Motor seal IMPORTANT WARNING INTRODUCTION TO YOUR NEW VEGETABLE PREPARATION MACHINE CL 52 “E” Version • Blades and plates • Grating discs TECHNICAL SPECIFICATIONS • Weight • Dimensions • Working height SWITCHING ON THE MACHINE • Advice on electrical • Noise level • Electrical data THE LEVER-OPERATED HOPPER AND ITS TOOLS SAFETY HOPPER USE AND DISC CHOICE TECHNICAL DATA STANDARDS • Exploded views CLEANING • Electric and wiring diagrams 15
ROBOT-COUPE S.N.C., LIMITED WARRANTY 2 - Labour to sharpen and/ or replacements for Your new ROBOT-COUPE appliance is warranted to the original buyer for a period of one year from the date of sale if you bought it from ROBOT-COUPE S.N.C. If you bought your ROBOT-COUPE product from a distributor your product is covered by your distributor’s warranty (Please check with your distributor terms and conditions of the warranty). The ROBOT-COUPE S.N.C.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE Eng IMPORTANT WARNING W A R N I N G WARNING : In order to limit accidents such as electric shocks or personal injury, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to know your appliance and enable you to use the equipment correctly.
INTRODUCTION TO YOUR NEW VEGETABLE PREPARATION MACHINE CL 52 “E” Version The CL 52 is perfectly geared to professional needs. It can perform any number of tasks, which you will gradually discover as you use it. The CL 52 is equipped with a removable lid, metal bowl an stainless steel motor base. The full moon hopper is ideal for cutting large products. Before plugging in, check that your power supply corresponds to that indicated on the machine’s identification plate.
A special tool has also been designed to remove the hollowing cutter. Assembly With the motor unit facing you, slot the black or white ejection tool onto the drive shaft and check that it is correctly positioned at the bottom of the bowl. Position your chosen disc: a) If you have opted for a slicing, grating or julienne disc: position the disc on the motor shaft. To ensure that it is correctly positioned, turn it in a clockwise direction. b) You have chosen a dicing unit: i.e.
Next fit the appropriate slicing disc and rotate in a clockwise direction to check that it i correctly positioned. Then, screw the loading cone or the hollowing cutter onto the motor shaft according to the type of vegetable to be prepared (unless using the removable divider). It should be remembered that the loading cone is suitable for all types of vegetable except for cabbage. The hollowing cutter is designed for that purpose. Slide the hinge pin Always use a properly cleaned grid.
W A R N I N G To get the very best results when cutting french fries, remember to insert the removable divider in the hopper and load the potatoes into the left-hand compartment (see photo opposite). Depending on the application, use the removable divider to stack the vegetables higher in the hopper (e.g. carrots and potatoes) and prevent the more fragile ones (e.g. tomatoes) from being damaged by the loading cone. - Fill the feeder right up to the top with vegetables.
MAINTENANCE TECHNICAL SPECIFICATIONS • ELECTRICAL DATA Single-phase machine • MOTOR SEAL • WEIGHT Net Gross Motor Speed (rpm) Intensity (Amp) CL 52 E complete 25.5 kg 28 kg 230 V/50Hz 375 5.3 0,5 kg 0,6 kg 240 V/50Hz 375 5.3 In order to keep the motor completely watertight, it Average weight of one disc 120 V/60Hz 450 8.9 is advisable to check the motor seal regularly for • DIMENSIONS (in mm) 220 V/60Hz 450 5.3 Motor Speed (rpm) Intensity (Amp) 400 V/50Hz 375 2.
To restart your machine, simply relock the lid. Eng In addition, the cover locking catch is equipped with a safety mechanism which prevents the processor from being used if the cover is not correctly positioned. The CL 52 is equipped with a thermal protection system which automatically stops the motor if it has been running for too long or is overloaded. If this happens, allow the machine to cool completely before restarting.
136
7
139
140
141
143
24/04/13 17:15 Page 1 Head Office, French, Export and Marketing Department: 48, rue des Vignerons 94305 Vincennes Cedex- France Tel.: 01 43 98 88 15 - Fax: 01 43 74 36 26 Email: international@robot-coupe.com Robot Coupe Australia Pty Ltd: Unit 3/43 Herbert St Artarmon NSW 2064 Australia T (02) 9478 0300 F (02) 9460 7972 Email: orders@robotcoupe.com.au www.robot-coupe.com Robot-Coupe U.K. LTD: Fleming Way, Isleworth, Middlesex TW7 6EU Tel.: 020 8232 1800 Fax: 020 8568 4966 Email: sales@robotcoupe.co.