Specifications

17
• DIMENSIONS (in mm)
If the food has a solid consistency, remove the blade
and empty the bowl.
Replace the bowl, place the blade back on the shaft
and switch on the machine in order to remove any
mixture which may have stuck to the blade.
If you wish, you can rinse the bowl by filling it with
hot water and switching on for a few minutes.
• CITRUS-PRESS ATTACHMENT
Disengage the basket with the cone by rotating it
clockwise. Then raise them all together. Disengage
the bowl as usual. After that, clean each part.
• VEGETABLE PREPARATION ATTACHMENT
Remove each of the parts, i.e.: the lid, disc, sling
plate and bowl and clean.
Diswashers are best avoided. Instead we recom-
mend that you clean the machine by hand, using
washing-up liquid.
• BLADE
After cleaning the blade, always dry the blades
well.
MAINTENANCE
• BLADE
We strongly recommend that the blades (smooth
ones) are sharpened daily using sharpening stone
supplied with machine.
The quality of the cut depends mainly on the
sharpness of your blades and the degree of wear.
The blades are actually wearing parts, which
should be replaced occasionally to ensure consistent
quality in the final product.
• MOTOR SEAL
The motor seal protects the motor base and motor
from any leaks and needs to be replaced at regular
intervals.
• BOWL LOCATING PLATES (R301 Ultra)
If these plates wear out, the bowl will no longer be
securely attached to the motor base.
This makes it awkward to use since the bowl can
come loose during processing.
There is no risk to the user however, because the
safety system will automatically stop the machine.
It is advisable therefore to change these plates in
order to ensure maximum ease of use.
TECHNICAL
SPECIFICATIONS
• WEIGHT
net weight gross weight
R 301
(without disc)
13 kg 16 kg
R 301 Ultra
(without disc)
14 kg 17 kg
• WORKING HEIGHT
We recommend that you position the food processor
on a stable worktop so that the upper edge of the
large feed hopper is at a height of between 1.20 m
and 1.30 m.
• NOISE LEVEL
The equivalent continuous sound level when the
food processor is operating on no-load is less than
70 dB(A).
• ELECTRICAL DATA
single-phase machine
Speed Power Intensity
Motor
(rpm) (watts) (Amp.)
230 V / 50Hz 1500 650 15.7
115 V / 60 Hz 1800 650 12.0
220 V / 60 Hz 1800 650 15.7
IMPORTANT
Check that your detergent is suitable for
cleaning plastic parts. Some washing agents
are too alkaline (e.g. high levels of caustic
soda or ammonia) and totally incompatible
with certain types of plastic, causing them to
deteriorate rapidly.