User Manual

www.veear.eu
User Manual (1.0.14) EasyVR 3 23
Figure 2 - Finding example sketches for the EasyVR
With Arduino 2009 – Uno – Mega
Test the Shield with Arduino
1. Set the Mode jumper (J7) in the SW position
2. Open the example sketch TestEasyVR from your IDE menu “File” > “Examples” > “EasyVR”
3. Upload the sketch and open the “Serial Monitor” window
4. See comments on top of the sketch for usage details
Test the Shield with the EasyVR Commander
1. Make sure the Mode jumper (J7) is in the PC position
2. Open the EasyVR Commander and connect to the same serial port used by Arduino
Download a new sound-table or firmware update
1. Make sure the Mode jumper (J7) is in the UP position
2. Open the EasyVR Commander and select the Arduino serial port
3. While disconnected choose “Update Custom Data” from the “File” menu (or “Update Firmware”
from the “Help” menu)
When the EasyVR Commander is connected, you can also generate a template code for Arduino that will
use the provided libraries (see EasyVR Arduino Library Documentation). All you need is to write actions for
each recognized command.