User Manual

www.veear.eu
6 EasyVR 3 User Manual (1.0.14)
Technical specifications
CABLES
MISC
SPEAKER
MIC
R4
D2
GPIO
IO1
SP+
AUDIO
IO2
SP-
IO3
VM
IO4
MIC
IO5
RET
IO6
VDD
MIKROBUS
XM
MIKROBUS
RST
DE
TX
RX
3V3
5V
GND
GND
PWR SEL
QUICK USB
D1
MISC
ADAPTER
MISC
The outer headers J1 and J2 are the mikroBUS™ interface connectors, providing selectable 3.3V/5V power
input to the module and voltage translated digital I/O lines, including: UART receive/transmit lines and
control pins.
The header J3 provides configurable I/O expansion lines (inputs with weak internal pull-up by default),
powered at the internal logic voltage VDD.
The header J4 contains the main analog signals, such as microphone signals and amplified DAC outputs,
which are also available on the internal right angle connectors J5 and J6.
The module can also be operated through the programming connector J7 alone, by using the QuickUSB
Adapter Cable.
6 4 2
5 3 1