User Manual

www.veear.eu
72 EasyVR 3 User Manual (1.0.14)
Real-Time Lip-Sync
Another feature available from the “Tools” menu is the “Real-Time Lip-Sync”. In fact, starting from
Firmware revision 4, you can use this feature to let your “animatronic” characters “speak” moving their
lips. Clicking on “Real-Time Lip-Sync” will open the following window:
Figure 10 - Lip-Sync interface with animated mouth
If you click on “Start” the virtual mouth on the window will start moving in sync with your voice.
In real animatronic characters you can use a servo to move their lips.
You can specify a maximum duration (timeout) or leave it running until you click on “Stop”. You may also
specify a threshold for the input signal power, below which the mouth is considered closed (silence).
Import and Export of Custom Commands
Starting with firmware revision 4 of the EasyVR 3 module, it is possible to export all the data, including
training, of the existing commands and passwords into a file. You can then use that file to import all the
commands at once into another module or just as a backup for your commands.
While the module is connected, click on “Export Commands…” under the “File” menu and write the name
of the file that will contain the exported commands. In the same way you can select “Import
Commands…” and then choose the file with the commands you would like to import.
Note: During the Import procedure all the existing commands will be discarded and replaced
by the ones contained in the specified file!
During the Import/Export process some feedback is provided with pop-up windows and with the progress
bar on the main window.