User Manual

www.veear.eu
User Manual (1.0.14) EasyVR 3 77
Message Recording
Starting from firmware Revision 1 of the EasyVR 3 module, it's possible to record up to 32 messages. The
communication protocol and Arduino library have been updated accordingly (see related chapters).
The first time you update the module with a firmware with message recording capability, the serial flash
memory of the module has to be formatted. The EasyVR Commander will automatically identify a module
with the memory to be formatted and will alert you with the following window:
Figure 14 - Alert for corrupted message storage
The same window could appear in case the memory is corrupted for any reason (i.e. the module has been
switched off while recording or erasing a message).
With EasyVR Commander v3.10.0 and above you can also record, play and erase messages by clicking on
the specific buttons, after selecting the "Messages" group in the Group List.
In order to record a message you have to press the "record button" to start recording and press it again to
stop.
Figure 15 - User interface for messages