Data Sheet

2 SDC3260 Motor Controller Datasheet Version 1.3 January 23, 2018

Orderable Product References

Reference Number of Channels Amps/Channel Volts Ethernet Resolver

SDC3260 3 20 60 No No

• PID control loop

• Built-in Battery Voltage and Temperature sensors

• Optional backup power input for powering

safely the controller if the main motor batteries

are discharged

• Power Control wire for turning On or Off the

controller from external microcomputer or

switch

• No consumption by output stage when motors

stopped

• Regulated 5V output for powering RC radio, RF

Modem, sensors or microcomputer

• Separate Programmable acceleration and

deceleration for each motor

• Ultra-efﬁcient 9.0 mOhm ON resistance

MOSFETs

• Selectable triggered action if Amps is outside

user-selected range

• Short circuit protection

• Overvoltage and Undervoltage protection

• Watchdog for automatic motor shutdown in

case of command loss

• Overtemperature protection

• Diagnostic LED indicators

• ABS plastic enclosure with heat conducting

bottom plate

• Efﬁcient heat sinking. Operates without a fan in

most applications.

• Dustproof and weather resistant. IP51 NEMA

rating

• Power wiring using screw terminals

• 4.8’’ (123.0mm) L, 3.3” W (83.0mm), 1.0”

(25mm) H

• -40o to +85o C operating environment

• 0.25 lbs (100g)

• Easy conﬁguration, tuning and monitor using

provided PC utility

• Field upgradeable software for installing latest

features via the Internet Orderable Product

References