TSS-4 Digital SD Recorder User Manual Before installing and using, be sure to read this Manual for best performance.
ATTENTION This product is to be used within the vehicle interior. In order to prevent shortcircuit or the risk of electrical shock, do not use this product within a wet environment. In the event of any foreign solid or liquid entering the DVR, please disconnect the power immediately, and have a qualified technician confirm safe operation. The product is high-tech equipment, with no user-serviceable parts. Please refer all service to qualified technical personnel.
Contents Installation Environment..........................................................................................................2 Packing List...............................................................................................................................2 Product Overview .....................................................................................................................3 Features......................................................................................
Features Operating System Embedded Linux operating system forstablility. Simple Menu User-interface Graphical on-screen display. Video Compression Standard H.264 Video format: Excellent images, and the most efficient bit stream. Surveillance and Video Processing Surveillance: 4 channels D1 video (PAL: 720 * 576, NTSC: 720 * 480) Recorder: Total resources 100 PAL, 120 NTSC. 4 channels CIF (PAL: 352* 288, NTSC: 352 * 240), HD1 (PAL: 720* 288, NTSC: 720 * 240), D1.
Technical Parameters Items System Video Item Name Item Number Solutions Operation Interface Password Control Video Input Video Output Audio Digital Processing & Storage Others Packaging Video Display Video Standard System Resources Audio Input Audio Output Basic Output Level Distortion Plus Noise Recording Mode Audio Compression Image Compression Image Format Video Stream Video Usage of SD card Resolution Video Streaming Standard Audio Bit Rate Audio Usage Of SD card Internal Storage Image Quality Pow
Optional Features GPS module Ports (one RS-232, one RS-485, cradle head control, PELCO-D, Baud rate 9600, address code 0x01) 3G module Intercom function Installation Instructions External Interface Wiring
4-pin Connector layout Remarks: If the power supply is 12V, then the current of 12V output is limited to 1A. If there are more than 3 cameras, we suggest that customers get power for other cameras from the 12V vehicle power directly. RS485 and RS232 interfaces are optional. Ports: DEBUG: testing port EXTEND: intercom connection port SD Card Installation Unlock the unit with the key, making sure that the arrow points to he “UNLOCK” position. Note: The lock also controls the power.
Using the DVR Front Panel LED PWR LED: Lit when system is active. Power LED on. RUN LED: LED flashes when during normal operation. SD LED: Flashes when recording, playing back or backing up. GPS LED: GPS activity indicator. 3G LED: 3G activity indicator. ACC LED:Vehicle started indicator REC LED: Recording indicator Key and Other Descriptions IR: Infrared receiving window for remote control. LOCK: Secures the SD Card, and controls DVR power.
Remote Control Operation Note: The numeric keys may be used when entering passwords.
Menu Setup In Live (non-recording) mode, press MENU. If this the first time entering the MENU, the system will display “ENTER THE PASSWORD” (The default password is 6666). When finished, press OK to exit the MENU interface. In Record mode, please press STOP to stop recording, then press MENU to enter the MENU interface. Settings: To set up items as below • • • • • • • TIME: Sets the time. CAR LICENSE:Sets the vehicle ID number. VIDEO MODE:Sets the video standard (NTSC or PAL).
Video download: • Connect USB Flash Drives or HDD to USB interface in front of the DVR Shift to "Playback menu", select target video for download by Remote control, press "OK" to start copy. Repeat for each section. • • Alarm record time: 10-90 seconds since alarm record. GPS Transmission Interval: GPS signal transmission interval. • • Alarm: Network: • • • • DOMAIN NAME: Used for 3G real-time viewing--Sets server domain. SERVER PORT: Used for 3G real-time viewing--Sets server port.