User manual

Menu Setup
In Live (non-recording) mode, press MENU. If this the first time entering the MENU, the
system will display “ENTER THE PASSWORD” (The default password is 6666). When
finished, press OK to exit the MENU interface. In Record mode, please press STOP to stop
recording, then press MENU to enter the MENU interface.
Settings: To set up items as below
• TIME: Sets the time.
• CAR LICENSE：Sets the vehicle ID number.
• VIDEO MODE：Sets the video standard (NTSC or PAL). Takes effect upon
restart of the DVR.
• DELAY TIME： Sets the timer turn-off function. Default time is 5 seconds. Can
be set to 5, 30, 60, 120, 300, 600, 1200, 1800, 3600 or 7200. Takes effect upon
restart of the DVR.
• PASSWORD：To change the password, you need to enter the original
password.
• NEW PASSWORD：Set the new password.
•
SD Card：Set up and check the information on the SD Card.
• SD Card OVERWRITE：Setup the rewrite function
• SD Card TOTAL SIZE：Show the total capacity of the SD Card.
• SD Card FREE SIZE：Show the remaining capacity of the SD Card.
• SD Card FORMAT：Formats the SD Card. Requests password, if you are using
one.
Record：Settings for the video files.
• REC RESOLUTION：CIF/HD1/D1
• RECORD FRAME：1~30frames（adjustable）
• REC QUALITY：Sets the picture quality (8 levels total，LOWEST—HIGHEST)
• DISPLAY CH：Setup the channels-display on the viewing monitor
• FILE TIME: Sets record time of image files (300 ~ 3600 seconds)
• VIDEO RECORD CH：Sets the recording video channels. RED means record.
• AUDIO RECORD CH：Setup the recording audio channels. RED means record.
• REC SCHEDULE：Sets the recording mode for different start/stop times.
White：No recording Red：Recording S ：Alarm recording
Search：Play back the recorded videos.
• FILE LIST：Display the date of the videos and select the date to see the time
list of the videos within that day. Select the desired time, and press “PLAY”on
the remote control to play back the clip.
• PLAYBACK CH：Only 1 channel at a time can be played on your monitor (all
can be viewed on the computer application). This selects the channel for
playback.