Data Sheet

4/27/2018 What is ROBOTIS OP3
http://support.robotis.com/en/product/robotis-op3/introduction/what_is_robotis_op3.htm 2/4
OP3 looks quite different from OP2 as default skin is not provided. Users can download design skin files.
Downloaded skin files can be used for 3D printing.
ROBOTIS OP3 is loaded Intel NUC with i3 processor to achieve significant improvement in computing power.
OP3 supports HDMI and Display Port(DP) while OP2 only supports mini HDMI.
There are 1 RGB LED and 3 LEDs, 4 buttons on the back of OP3. From left to right, each button stands for Mode, Start, User, Reset.
Here are some mechanical differences :
1. New mini HDMI port connector on the ROBOTIS OP2
2. Location of the ports
3. ROBOTIS OP2 no longer has the 3.5mm microphone and audio jacks
▲ Moderate changes have been made in the back panel of OP3.
Advantages of developing with ROBOTIS OP3 compared to ROBOTIS OP2
As mentioned above, there are several changes in OP3 and advantages of the new OP3 are listed as follows:
New Actuators(higher torque)
Increase of SSD capacity
Increase of RAM capacity