User Manual

- 10 -
G303e (external) model with optional serial interface
1. Connect the receiver to the serial port using the supplied adapter,
which combines both the serial interface and the audio lead in one
cable.
2. Connect the audio lead on the PC side to the sound card Line input. (If
there is no Line input on your PC, as is the case with some laptops, you
may use alternative inputs, such as the Microphone input. This may be
also necessary with certain types of sound cards, such as Creative
Audigy 2.)
3. Plug the supplied power adapter to the power outlet and connect its
output to the receiver.
4. Turn the receiver on using the power switch at front of the receiver. The
blue LED will blink to indicate that the receiver is ready.
G303e receiver with serial interface