User Manual

- 20 -
Using the keyboard, type in the frequency of one your local AM stations:
For example, for 774 kHz, type in 7 7 4 , then k for kHz, then press Enter.
The typed-in frequency will appear on the digital frequency display. Then
select the AM mode by clicking on the AM button. At this point, you should
hear the station. You can adjust the volume using the two buttons next to
the small Volume display. (Note also the little slider between these two
buttons: you can drag it up and down to change the volume faster.)
Manual tuning can be done in several ways. Let’s start with the tuning knob:
Place the mouse cursor to the upper half of the tuning knob, at which point
you will see the cursor change to a curved double ended arrow. Hold down
the right or left mouse buttons to increase or decrease the frequency, and
the knob will rotate clockwise or anti-clockwise, respectively. If you place
your cursor in the bottom half of the tuning knob, the direction of the rotation
will reverse.
The rotation increment of the tuning knob is 0.5 kHz. This can be changed
easily using the Shift, Ctrl or Alt keys: If you press the Shift key while tuning,
the increment will increase ten times (to 5 kHz). Pressing Ctrl will increase
the increment a hundred times (50 kHz). On the other hand, if you use the
Alt key, the increment becomes ten times finer: 50 Hz.
If you are still unable to tune to any stations at this point, please refer to
Appendix A - Troubleshooting.
There are also several other ways to tune the WiNRADiO receiver other
than typing the frequency or using the tuning knob. These will be explained
in detail in the Using WiNRADiO G303 Receiver chapter.
Did you know?
The first commercial shortwave station was Radio Luxembourg. It was the
first station to target areas outside of its own country with programs in other
languages. For most of the 20th century, this was the most powerful
shortwave station in Europe.