User Manual

- 33 -
• For quick tuning to your favorite stations, you can assign
Hotkeys (function keys F2 to F12) for up to eleven different
frequencies. If you then press a hotkey, the associated
frequency will be instantly recalled. Hotkeys which are already
assigned will be shown in this dialog box as ‘used’, however
you can overwrite the previous assignment with a new one if
you wish.
• User Comments can also be stored with a frequency. The size
of the comments is limited to 31 characters.
• The Mode and the Squelch values can also be stored, which
will then be set automatically when the frequency is recalled.
• Finally, a Memory Scan Lock-out can be set for each
memory, which means that the memory will not be included in a
memory scan. In the memory Recall window, such memories
will be shown with a small ‘x’ preceding the memory number.
Finally, when everything has been set, click on OK or press Enter, to save
the new frequency.
Recalling a Frequency from Memory
There are several ways to recall a frequency from memory:
• Using Memory Recall
• Typing a number into the memory number display
• Using a hotkey
• Memory stepping
To recall a frequency, click on the R button. A dialog box will pop up
showing a list of all memory frequencies.
To select a frequency, click on an item in the list, and the frequency will be
tuned. Then close the window. Alternatively, use the up or down cursor
keys to choose the frequency and press Enter.