User Manual

- 35 -
Saving a Memory File
Each memory file, containing up to one thousand frequencies, is stored
separately, allowing different memory files to be loaded and saved. To save
the current memory file, simply select Save from the Memory file sub-menu
in the File menu. If you wish to save it with a different name, select Save as
instead, and a dialog box will pop up allowing you to specify the file name.
When you exit the WiNRADiO G303 application, all memory changes are
automatically saved; there is no need to use the Save command before exit.
Opening a Memory File
When WiNRADiO starts up, the most recently used memory file will be
opened automatically.
To open a different memory file, select Open from the Memory file sub-
menu in the File menu. A dialog box will pop up allowing you to choose a
memory file to load.
Memory Stepping
Memory stepping makes it possible to step through frequencies stored in the
current memory file.
To step through memory frequencies use the left or right arrow buttons
located under the memory S and R buttons. The double-arrow buttons
located further down make it possible to advance ten frequencies up or
down (or to the start/end of the memory list if it is less than ten frequencies
away).
Memory stepping will only work if there are frequencies stored in memory. If
no frequencies have been stored, nothing will happen if you try to step
through the memory.
Scanning
The WiNRADiO G303 application contains a comprehensive set of scan
functions to enable the user to search for stations which are currently on the
air. There are three basic types of scanning: Immediate Scanning
(Searching), Range Scanning and Memory Scanning.