User's Manual

- 27 -
Saving a Memory File
Each memory file, containing up to one thousand frequencies, is stored
separately, allowing different memory files to be loaded and saved. To save
the current memory file, simply select
Save
from the
M
emory file
sub-menu
in the
File
menu. If you wish to save it with a different name, select
Save a
s
instead, and a dialog box will pop up allowing you to specify the file name.
When you exit the WiNRADiO G3 SERIES application, all memory changes
are
automatically saved; there is no need to use the Save command before exit.
Opening a Memory File
When WiNRADiO starts up, the most recently used memory file will be
opened automatically.
To open a different memory file, select
Open
from the
M
emory file
sub-
menu in the
File
menu. A dialog box will pop up allowing you to choose a
memory file to load.
Memory Stepping
Memory stepping makes it possible to step through frequencies stored in the
current memory file.
To step through memory frequencies use the left/right arrow buttons located
under the memory
S
and
R
buttons. The double-arrow buttons located
further down make it possible to advance ten frequencies up or down (or to
the start/end of the memory list if it is less than ten frequencies away).
Memory stepping will only work if there are frequencies stored in memory. If
no frequencies have been stored, nothing will happen if you try to step
through the memory.
Scanning
The WiNRADiO G3 SERIES application contains a comprehensive set of
scan functions to enable the user to search for stations which are currently
on the air. There are three basic types of scanning:
Immediate Scanning
(Searching),
Range Scanning
and
Memory Scanning
. The scanning method
is selected using the appropriate button in the
Scanning Control Panel
: