Operating instructions

26
Chapter 12 Maintenance: Storage
STORAGE
If you put the system in storage for a period of time, you should do the following:
1. Clean the Plastic. Clean the plastic as described in the maintenance section (If robot is
stored with a dirty body it may be harder to clean at a later date, as stains may become
permanent).
2. Always store it with a cover. Storing the system with a dust cover on it will keep it clean
and protect the Smoke Alarm and House from scratches. It will also keep ultra-violet light
from effecting the ABS plastic body.
3. Store indoors in a temperature controlled environment. Do not store it in a location that
will get extremely hot. Extreme heat will damage the color panels and could warp the
plastic. Storing it in a room temperature location is the best way to protect it and prevent
damage.
4.
!
Charge the battery fully as per instructions in battery section if you have this option.
(Storing the battery for any length of time without being fully charged will
permanently damage the battery.) The battery should be stored in a dry place between
55-75 degrees F.
5. Test in Advance of Programs. After storing the House of Hazards always test the robot
well in advance of any scheduled activity as it is impossible to anticipate problems. This will
ensure time to correct the problem.