Instructions
1212
www.cel-robox.com
1.0 Introduction
Safety Guidelines
• Follow all safety rules in this section and observe all cautions and warnings in
this guide (and those from any additions and materials used in conjunction
with the product).
• Before using the product, carefully read and understand all the manuals that
were included with the package. Check for updated versions on our website.
• Do not modify any safety features or make modifications to Robox®. Doing so
is prohibited and may void your warranty and/or aect the safe operation of
the product.
• Use of print materials other than Robox® print materials and genuine Robox®
components may void warranty.
• Tie back long hair and loose clothing and keep fingers away from moving
parts.
• Adult supervision is required; observe children closely and intervene as
necessary to prevent potential safety problems and ensure the appropriate
use of the product. Ensure small 3D prints are not accessible to young
children.
• These 3D prints are potential choking hazards for young children.Protective
glasses should always be worn when removing support material, especially
PLA.
• Do not use the product to create items which may be in contravention of laws
or regulations applicable in your area.
• If you encounter technical problems with the product, contact a qualified
service technician, your retailer or CEL Technology.