Instructions
4343
www.cel-robox.com
5.0 AutoMaker Soware
5.1 User Interface
This section outlines the major elements which make up the AutoMaker™ user
interface. There are basically 3 separate screens - Status, Layout and Settings.
• Status Screen - This page displays the current status of the selected printer. It
shows what it’s doing, what filament and head are installed, as well as extra
information on temperatures etc.
• Layout Screen - This page is used for laying out the 3D models of objects
you’d like to print. They can be moved, scaled, duplicated and rotated using
simple controls.
• Settings Screen - This page allows you to choose print settings, for example
materials, quality/speed, fill density and support.
The soware is designed to be as simple to use as possible, so we have removed
a lot of the more advanced settings from plain sight, but don’t worry there’s
plenty of room for you tinkerers too!
The diagram below shows the main screen elements of AutoMaker™.
1 Side Bar 4 Toolbar
2 Advanced Tray 5 Program Window
3 Tab Bar
1
2
3
4
5