Instructions

1313

www.cel-robox.com

AutoMaker™ Overview

Once you are happy with your layout, click the Next icon to proceed to the

Settings Screen.

Settings Screen

This part of AutoMaker™ is used for modifying any settings relating to the print

before proceeding to production, including support material, speed/quality and

fill density.

1 Quality Setting 4 Fill Density

2 Custom Print Profile 5 Support Material Setting

3 Profile Summary 6 Brim Width

• Quality Setting

This allows you to select a basic quality setting from the list of options - Dra,

Normal or Fine. The final option - Custom allows you to create a new profile

or to select from a previously created one. To create a new profile, click the

selection box and choose Create New... - for more information on this, see

the User Guide.

• Profile Summary

This displays a brief summary of the currently selected print settings. The

information available is as follows:

• Layer Height in microns (µm).

• Perimeters use - which nozzle is used to print the outside surface

• Infills use - which nozzle is used to print the inside fill of the object.