TRIPLE ACTION/ BALLHEAD VANTAGE SERIES RTH-1050
Specifications Maximum Load Material 55 lb. (25 kg) Aluminum Lateral Tilt -45º to +45º Vertical Tilt Panning Range Base Diameter 0º to +90º 360º 2.75 in. (7 cm) Height 5 in. (12.7 cm) Weight 1.8 lb. (0.
Precautions • Do not exceed the ballhead’s maximum load capacity. • Ensure that all appropriate locks are engaged when necessary. • This ballhead should be used only in temperatures ranging between -22°F and 140°F. Do not operate in salt water. Dry the ballhead if it becomes wet. • Remove the camera from the ballhead during setup or transport. • Keep this product away from children. • All images are for illustrative purposes only.
3 Overview 2 1 4 5 10 6 9 7 8
1. Quick-release knob Turn counterclockwise to loosen the jaws or remove the quick-release plate. Turn clockwise to tighten and secure the quick-release plate. 2. Quick-release plate The Arca-style compatible quick-release plate attaches to the base of your camera via the 1/4-20 mounting screw. 3. 1/4-20 mounting screw 4. Bubble level Use the bubble level to ensure that your camera is properly aligned with the horizon.
5. 90° notch Use the notch to quickly switch your camera from landscape to portrait orientation. 6. Pan knob Turn the knob counterclockwise to unlock the base. Rotate the base to the desired position, and lock the base by turning the knob clockwise. 7. Panoramic base with 360° markings Use the pan degrees scale to accurately set up panoramic shots. 8. 3/8-16 threaded mounting socket Tighten all the knobs on the head. Then rotate the ballhead clockwise onto the tripod.
9. Main locking knob Turn clockwise to lock the ballhead’s position. Turn counterclockwise to unlock and reposition your camera. Important! Make sure to support the camera with one hand while you disengage the main locking knob. 10. Tension dial Sets the minimum amount of friction on the ball. This ensures there’s friction on the ball, even if the main locking knob is disengaged. This is useful to quickly unlock, reposition, and lock the ballhead without accidentally losing control of the camera.
Ten-Year Limited Warranty This Robus product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of ten (10) years from the original purchase date or thirty (30) days after replacement, whichever occurs later.
