Operation Manual

WWW.ROCCAT.ORG / SUPPORT

All connectors are color coded to simplify the process of connecting the ROCCAT™ Kave gaming

headset. These markings correspond to the colors on the soundcard sockets as used by many hardware

manufacturers. If this isn’t the case with your soundcard, please refer to your soundcard’s user manual.

Plug the pink connector into the microphone

socket on the soundcard.

Plug the green connector into the

headphone/front speaker socket.

Plug the orange connector into the

subwoofer and center speaker socket.

Plug the black connector into the rear

speaker socket.

Plug the USB connector into any free USB

port.

Er dient der Stromversorgung des Headsets

The USB connector powers the headset

and remote, therefore it should either be

plugged directly into the computer or into a

mains powered USB hub. Using the headset

with a bus-powered USB hub may lead to

problems.

CONNECTING

USB

Headset connector marking Soundcard socket

Pink (jack plug) Microphone

Green (jack plug) Front speaker (right and left)

Orange (jack plug) Subwoofer and Center

Black (jack plugr) Rear speaker (right and left)

Gray (USB connector) USB port

USB