User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
107
Cleaning and Disinfecting the Meter and the Lancing Device
CoaguChek INRange User’s Manual
On completion of cleaning:
4 With the cover off, let the test strip guide
dry for at least 10 minutes.
5 After this time, re-attach the test strip
guide cover to the housing. Make sure that
the cover is properly closed. You will hear
it snap into place.
Cleaning and Disinfecting the Lancing Device
NOTICE
• Do not throw away the lancing device cap
after each use. Use approved cleaning and
disinfecting products on it.
• Remove the lancet before cleaning and
disinfecting the lancing device.
To clean and disinfect without damaging
the lancing device, follow these procedures
carefully.
DRAFT - CONFIDENTIAL