User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
109
Cleaning and Disinfecting the Meter and the Lancing Device
CoaguChek INRange User’s Manual
What to clean and to disinfect
• The entire lancing device surface
• The cap
How to clean and disinfect the lancing device
1 Wash hands thoroughly with soap and
water.
2 Wipe the entire surface of the lancing
device and the inside of the lancing device
cap with the approved cleaning and
disinfection product. Always use the same
product for both cleaning and disinfecting.
3 Dry the lancing device and cap with a soft
cloth or gauze. Make sure no solution is
seen in any opening.
4 For disinfecting the lancing device, repeat
step 2 using a new wipe or cloth. Follow
the instructions of the lancing device.
5 Wash hands thoroughly with soap and
water.
DRAFT - CONFIDENTIAL