User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
54
Testing a Capillary Blood Sample
CoaguChek INRange User’s Manual
The target range is the range that you
have agreed with your Healthcare Profes-
sional. Your test result should fall within the
target range.
The measuring range refers to the
measuring range of the system itself and is
dened by the technical limits of the meter
and test strip.
The valid measuring ranges for CoaguChek
XS PT test strips are:
• INR: 0.8–8.0
• %Q: 120%–5%
• Sec: 9.6–96
If results outside the measuring range are
displayed, refer to the section Test limita-
tions and known interferences in the pack-
age insert supplied with the test strips, and
repeat the test.
DRAFT - CONFIDENTIAL