User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
91
Reminders and Meter Settings
CoaguChek INRange User’s Manual
Units
1 Select Units and press the Enter button
to open the corresponding menu.
The currently active unit is shown with a
green dot on the right side.
2 Use the Arrow up/down buttons
to select your preferred unit. The newly
selected unit is highlighted (blue).
3 Press the Enter button
to conrm the
selection, which is now marked by the
green dot.
4 Press the Enter button
again to save the
selected unit.
A target range can only be set and used if
the unit is set to INR.
Settings
Beeper Volume
Set Targets
Result Format
Language
Units
Time & Date
Units
INR
%Q
Sec
Save
DRAFT - CONFIDENTIAL