User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
92
Reminders and Meter Settings
CoaguChek INRange User’s Manual
Result Format
Choose Detailed if you want to see your cur-
rent result in relation to your previous result
in the same screen. An up arrow indicates
that your current result is higher, and a down
arrow indicates that it is lower than your
previous result (see page 53).
1 Select Result Format and press the Enter
button
to open the corresponding
menu.
The currently active result format is shown
with a green dot on the right side.
2 Use the Arrow up/down buttons
to
select your preferred result format. The
newly selected format is highlighted
(blue).
3 Press the Enter button
to conrm the
selection, which is now marked by the
green dot.
4 Press the Enter button
again to save the
selected result format.
Settings
Beeper Volume
Set Targets
Result Format
Language
Units
Time & Date
Result Format
Simple
Detailed
Save
DRAFT - CONFIDENTIAL