User Manual
Table Of Contents
- Introduction
- Starting Up
- Testing a Capillary Blood Sample
- Reviewing and Handling Data
- Reminders and Meter Settings
- Cleaning and Disinfecting the Meter and the Lancing Device
- Other Functions and Troubleshooting
- Symbols, Icons, Messages
- General Product Information
- Index
93
Reminders and Meter Settings
CoaguChek INRange User’s Manual
Set Targets
A target range can only be set and used if
the unit is set to INR.
A target range (or therapeutical range)
denes the minimum and maximum values
which should be achieved during the therapy.
Reports and statistics can then include infor-
mation about values within, above or below
this target range.
1 Select Set Targets and press the Enter
button
to open the corresponding
menu.
The currently selected time period, which will
be used as the default time period for reports
and statistics, is shown with a green dot on
the right side.
2 Select the desired time period.
3 Press the Enter button
to conrm the
selected time period, which is now marked
by the green dot.
4 Press the Enter button
again to proceed
to the next step.
Settings
Beeper Volume
Set Targets
Result Format
Language
Units
Time & Date
Set Targets
60 Days
180 Days
90 Days
120 Days
Time Period
Next
DRAFT - CONFIDENTIAL