User Manual

Control and Proficiency Testing • 5
121
6 Touch Control Test.
7 In the QC Test menu, touch Control Test again.
8 Touch the button to select the parameter you want
to use.
9 The test strip icon prompts you to insert a test strip.
Remove a test strip from its container and close the
container again with the stopper.
10 Hold the test strip so the lettering with the test
name is facing upward.
11 Insert the test strip into the test strip guide in the
direction indicated by the arrows. Slide the test strip
in as far as it will go.
A beep indicates that the meter has detected the test
strip (provided the beeper is enabled).
QC Test
09:15 am
05/29/2015
Profi ciency
Test
Control Test
Main Menu
09:15 am
05/29/2015
Control Test
Review Results
Setup
Patient T
est
QC Test
09:15 am
05/29/2015
Op: Schulz
Par: PT
QC Test
09:15 am
05/29/2015
aPTT
PT
Exposure to external influences (such as humidity) may
deteriorate the test strips and may lead to error mes-
sages. Therefore, always close the container immedi-
ately after removing a test strip.