User Manual
Table Of Contents
- 1 Introduction
- 2 Putting the Meter into Operation
- 3 Meter Setup
- 4 Testing a Blood Sample
- 5 Control and Proficiency Testing
- 6 Review Results (Memory)
- 7 Extended Functionalities
- 8 Maintenance and Care
- 9 Troubleshooting
- 10 General Product Specifications
- 11 Warranty
- A Appendix
- B Appendix
- C Appendix
- Index
130
6 Touch Control Test.
7 Touch Proficiency Test.
For proficiency testing, the test parameter information is
read from the test strip.
8 The test strip icon prompts you to insert a test strip.
Remove a test strip from its container and close the
container again with the stopper.
9 Hold the test strip so the lettering with the test
name is facing upward.
10 Slide the test strip into the test strip guide in the
direction indicated by the arrows. Slide the test strip
in as far as it will go.
A beep indicates that the meter has detected the test
strip (provided the beeper is enabled).
QC Test
09:15 am
05/29/2015
Profi ciency
Test
Control Test
Main Menu
09:15 am
05/29/2015
Control Test
Review Results
Setup
Patient T
est
Profi ciency
09:15 am
05/29/2015
Exposure to external influences (such as humidity) may
deteriorate the test strips and may lead to error mes-
sages. Therefore, always close the container immedi-
ately after removing a test strip.