User Manual
Table Of Contents
- 1 Introduction
- 2 Putting the Meter into Operation
- 3 Meter Setup
- 4 Testing a Blood Sample
- 5 Control and Proficiency Testing
- 6 Review Results (Memory)
- 7 Extended Functionalities
- 8 Maintenance and Care
- 9 Troubleshooting
- 10 General Product Specifications
- 11 Warranty
- A Appendix
- B Appendix
- C Appendix
- Index
Review Results (Memory) • 6
133
6 Review Results (Memory)
The CoaguChek Pro II meter can save 2000 patient test
results as well as 500 liquid quality control tests to mem-
ory, together with respective time and date. In addition,
up to 120 code chip records (contents of 60 test strip
code chips and 60 control solution code chips) are
stored. If you are using operator and/or patient lists, a
maximum of 5000 Operator and 4000 Patient IDs is
allowed.
If the memory is full when you perform a test, the oldest
result is automatically deleted. The most recent result is
always saved. This applies both to patient results and to
quality control tests. In order to avoid the loss of stored
test results, you can archive this data using a data man-
agement system and the optional Handheld Base Unit
(see page 139).