User Manual
Table Of Contents
- 1 Introduction
- 2 Putting the Meter into Operation
- 3 Meter Setup
- 4 Testing a Blood Sample
- 5 Control and Proficiency Testing
- 6 Review Results (Memory)
- 7 Extended Functionalities
- 8 Maintenance and Care
- 9 Troubleshooting
- 10 General Product Specifications
- 11 Warranty
- A Appendix
- B Appendix
- C Appendix
- Index
140
Through the DMS the system administrator (such as the
POC coordinator) may specify what settings are to be
applied to a set of meters within a site or unit (e.g., hospi-
tals or wards). All meters assigned to a specific site and/
or unit would consequently share the same settings. The
different operator and patient lists (that match a site or
unit) are then made available on their respective meters.
Other settings such as QC Lockout and Operator Lockout
may easily be set (once) and distributed to all meters.
The option of setting up an Operator Lockout is availa-
ble only when operator lists are created on the DMS,
stored in the meter, and Operator login is activated. For
more details on Operator login see page 76, for details
on Operator Lockout see page 86.